Description
| Weighing range: | 50,000 kg |
| Capacity to DIN 8119: | 60,000 kg |
| Bridge lengths: | 18 |
| Bridge widths: | 3,0 m |
| Configuration: | Flush |
| Bridge height: | 39 cm |
| Weighing electronics: | IT 3000 |
| Bridge: | from reinforced concrete C45/55 (former B55) highly resistant to frost-defrost cycles, rough bridge platform surface, both ends finished with galvanized angle steel to protect all corners. |
| Pit: | From concrete C45/55 LP to DIN EN 206-1 |
| Front end with corner protections | |
| Drain hole with KG-Sleeve DN 100 | |
| Both surface and pit mounted weighbridges require a firm surface with a load bearing capacity | |
| EV2=60MN/m² | |
| Load cells: | 8 stainless steel sensors, tightly sealed and welded, IP68 |
| Calibratable: | to class III up to 3000 parts, up to 150% overload tolerance |
| Adjustable shock: | to limit the weighbridge transverse and end play |
| Cable terminal box: | for 8 load cells with 20 m shielded cable |
